Energistx H2o Hybrid Systems

Energistx offers you H2o Hybrid System technologies and eco-friendly sanitation equipment for both residential applications as well as Mobile Infrastructure for Municipalities, and all other industrial or domestic field applications. Energistx can deliver immediate solutions for water purification, desalination or wastewater treatment at competitive prices, anywhere in the world.

H2o Hybrid Non-Chemical Pool Sanitation

Enjoy luxurious, pure, chemical-free swimming with the superior EcoSmart Pool Sanitation System. Make your pool taste and smell like high-quality bottled water that your body and your family will LOVE being emmersed in. Experince the very best option for residential pool sanitation, that offers an effective and easy-to- maintain chlorine and bromine alternative using Ionization, Oxygenation and High-Tech Filtration Technologies. 60-day Money Back Guarantee!

With chemical maintenance of your pool, the mere bleaching of hair, drying out of the skin and the burning of the eyes should alert you to the health and environmental risks associated with chemical treatment of water. ECOsmarte's 100% CHLORINE-FREE POOL System provides you with a chlorine-free alternative for water treatment today. Why expose your family and friends to the known risks of cancer causing agents?

click here to Watch Video and Read Testimonials

Natural Oxygen. 
Easier to use than Chlorine! Safer than Ozone. 
More effective than Bromine or Bacquacil. 
Ionization Plus Oxygen -- The Complete Technology
No Regular Chemicals to the Swimming Pool
You will eliminate: 
Toxic chemicals 
Health hazards 
Offensive chemical odors 
Damage to our environment 
Damage to pool equipment 
Easy to Install 5 Year Warranty 100% Chlorine Free

GET YOUR FAMILY OUT OF TOXIC CHEMICALS
Save Our Planet From Chemical Backwash
With chemical maintenance of your pool, the mere bleaching of hair, drying out of the skin and the burning of the eyes should alert you to the health and environmental risks associated with chemical treatment of water. 
ECOsmarte's 100% CHLORINE-FREE POOL System provides you with a chlorine-free alternative for water treatment today. Why expose your family and friends to the known risks of cancer causing agents? 

WE SAVE YOU MONEY EVERY MONTH
 ECOsmarte® Pools  have the only method that can sanitize your pool or spa without chemicals. Our system costs less than $1 per month to operate, not to mention electrical savings from reduced filtration. Once you install an Energistx ECOsmarte®   100% Chlorine-Free System, you will have major savings by eliminating chemical expenses. Each unit comes with an easy installation and operation guide and six months toll free support at
1-866-733-8686
For spas and above ground pools (to 10,000 gallons), we also offer The ECOsmarte® Chemical Free Spa System as an effective low cost solution. The system uses copper ionization, which has a faster and longer kill rate than chlorine or bromine. Just select the ionize button on your control box for 10 minutes to 2 hours each week depending on the size of your spa or above ground pools. Natural oxygen is delivered to your spa at a rate ten times greater than ozone whenever the pump runs. Copper only systems may be used for waterfalls, fountains, ponds and water displays. Copper only units are upgrade able. 
Use ECOsmarte's CO2 pH down (rarely if ever does ECOsmarte pool or spa require pH up), and no toxic chlorine, bromine, bacquacil or acid is required. The system pays for itself with no chemical expense over the life of your pool or spa, with no equipment damage due to chemical corrosion. The CO2 has even been shown to buffer pH in acid rains. If you currently use pH adjusters you will eliminate this completely.

WE UNDERSTAND WATER CHEMISTRY
And Generate Oxygen to Improve It Naturally.
We have the track record of nearly 15,000 CHLORINE-FREE POOLS since 1993 to prove it. Our oxygen AND ionization is superior to ionization alone, which is superior to chemical treatment. Ionic Purification requires no chemicals to sanitize. Ionization alone does not address the problems of body oils and suntan lotions, and does not control stains. Ionization can cause an erratic water balance and the process by itself requires chemical maintenance. Oxidation is required to handle your organics. ECOsmarte® offers the complete technology with Ionic Purification, a two stage process: first the catadyne process that is similar to ionization and, second, the ECOsmarte® anodyne process with chemical-free oxidation. Water balance is much easier to maintain, staining is also eliminated, and no chemicals are needed for disinfection. We accomplish this with our proprietary Titanium oxygen electrodes, requiring no halogen supplement. Our oxygen is a more powerful oxidizer. 
Over seven years of in-field development in North America and product installed worldwide have involved us in almost every foreseeable problem with water chemistry. You, the pool owner or your service person will still need to do your normal pool housekeeping, and maintain your pH at water balance. We are the ECOsafe technology for the next millennium... 

ECOsmarte® products:

Have Breakthrough, Proven Technology 

ECOsmarte® takes a proven technology one step further, completely eliminating the need for sanitation chemicals or for adding toxic staining silver to your water. ECOsmarte's technology is superior to chemical treatment and more effective than any other alternative methods available. ECOsmarte® has become a market leader in agricultural and well water treatment using no salt or chemicals, as well as the leading developer for advanced pool purification products and rooftop cooling systems. We have developed carbon dioxide using aquarium industry principles to eliminate acid as a pH down.

Are Simple and Effective 

All of ECOsmarte's pool products are easy to install and come with complete documentation. They are backed up by ECOsmarte's 60 day money back guarantee* and 5 year factory warranty. 
Our pool owners guide will instruct you or your service personnel on the exact method to achieve the most beautiful silky water you have ever experienced. You will never swim in chlorinated water again once you have discovered the state-of-the-art, halogen-free pool. If you simply wish to reduce your use of chlorine and have a sand filter on your pool our Glass Pack™ will turn your 100 micron sand filter into a 3 micron mirror water, filtering oxidized ammonia, chloramines, uric acid, and even dead skin cells and hair. 

Do It For The Environment, and Your Health 

At ECOsmarte® we have a strong commitment to eliminate the unnecessary use of chlorine, brine, and toxic chemicals in the world today. ECOsmarte® eliminates the need for all sanitation and disinfectant chemicals, and is a product that has no equal at any price in the water purification industry. We have thousands of satisfied customers that are doing their part for a healthier environment, healthier hair, healthier skin and healthier eyes. We invite you to join them!

60-DAY SATISFACTION GUARANTEED
If you're not completely satisfied or 100% Chlorine Free
We will gladly exchange the product for any piece of other equipment at similar cost.
(less any shipping or installation costs, plus 15% restock fee)
(99+% reached since 1997)
We accept Visa, MasterCard, and Discover cards
1-866-733-8686

  click here to Watch Video and Read Testimonials

TECHNICAL SPECIFICATIONS:

Residential:
·  Input Voltage: 110V; 220V Available, 50 or 60 Cycle, CE Low Voltage Approved
·  Output Voltage: 30 VA Class UL CSA Compliance Power Supply, CE Low Voltage Approved
·  Ionization Electrode: 100% Pure Copper with coating
·  Oxidation Electrode: Proprietary Titanium composite material
·  Rated to 50,000 gallons, on Swimming Pool Models
·  Spa and Above Ground Pool Models 200 to 10,000 gallons
·  Koi/Waterfall Pond Units to 10,000 gallons
·  Pond and small Waterfall units also available at lower cost
·  Automated, Programmable Units to 100M gallon
Commercial:
·  Input Voltage: 110V or 220V; 240V Available, 50 Cycle, CE Low Voltage Approved
·  Output Voltage: 100 VA Class UL CSA Compliance Power Supply. CE Low Voltage Approved, UL Pending
·  Oxidation Electrode: Proprietary Titanium composite material
·  Ionization Electrode: 100% Pure Copper with coating
·  Rated to 300,000 gallons, priced from $4999. Programmable from $4,999 to $11,999
·  Custom plumbing available, toll-free technical support
·  Hundreds of hotel, apartment complex pools online
·  NEMA 4 Equipment Enclosure
·  CO² Systems incl. switchover tank manifold, addl. actual configuration costs quoted

pH Down Without Chemicals
The Automated Non-Chemical PoolSM

 Carbon Dioxide pH Control System
ECOsmarte Planet Friendly, Inc.


Mount the system securely to a standard high pressure Carbon Dioxide cylinder. Attach the power cord to a 110V outlet in your timer or hard wired (DC Voltage) to the ECOsmarte® Upgraded Controller. PVC injector check valve chamber should be plumbed into the return line in appropriate location as determined by installer and connected to the system with 3/8" flexible tubing included. The high pressure CO² cylinders can be filled at any welding shop or microbrewery, or exchange at your ECOsmarte® showroom. We Recommend a minimum tank size of 20lbs, refillable for $20.00 or less, with expected 4 to 6 week change outs.
Operation and Maintenance
The flow rate has been preset to meet maximum demand for CO² pH control. The controller shall actuate the flow control solenoid valve to provide pH correction as determined by our factory preset proportional feed control logic. Maintenance of the flow control unit is minimal, normal care in cleaning is advised. Field information and research indicates that it is impossible to achieve a pH below 6.7, so choose 20 minutes per day to begin. Ranges are typically 20 to 40 minutes depending on pool size and source water. Increase or decrease time as phenol red pH test dictate.
The CO² time will need to be adjusted to minimize cost of tank refills. The field experience indicates no need for pH sensors and their calibration and maintenance requirements. Customers should test twice weekly for the first 30 days.

EcoSmart Technology ECOsmarte® is attempting to patent a group of water treatment technologies using the appropriate combinations of electronic oxidation, copper ionization and specific world class filtration technologies developed by industry leaders. Here's how it works:

Copper Ionization: Ecosmarte® uses conventional copper ionization (without silver) in two different ways in its technology (110 CU grade or better.): ECOsmarte® copper electrodes are manufactured in a water soluble, non-chemical or machine oil process.
Point-of-Entry:
In both residential and commercial applications between .1 ppm and .5ppm trace ionization is placed constantly in the water flow. Most water pipe size applications have been addressed. When used with Ecosmarte® electronic oxidation, calcium is kept in the soft bicarbonate form in standing pressure lines, and at fixtures. The heat point required to precipitate calcium in the carbonate form is increased substantially. Ecosmarte® has specific successful history to 26 grains of hardness, (442 ppm) with a TDS level as high as 3000. No pH histories above 8.4 have been tested. PH levels of 5.2 to 8.3 are therefore required. Ecosmarte® manufactures low and high TDS water models for Point-of-Entry equipment, recognizing that the conductivity of the water completes the circuit.
Spas and Swimming Pools:
Ecosmarte® uses ionization in trace residual amounts for spa and swimming pool applications. Cupric ions (Cu²+) is kept at .4 to .7 ppm residual requiring ionization for a maximum of 15 minutes per week on a 600 gallon spa and 4 hours per week on a 24,000 gallon swimming pool. No constant introduction of copper occurs and the residual sanitizer in the pool is recognized by the National Sanitation Foundation (NSF) and the U.S. Environmental Protection Agency. The Ecosmarte 30VA control box offers a choice of oxidation, ionization or on/off all swimming pool or spa equipment. Fully programmable models available. Installation of a pressure switch is recommended on spas.
Commercial and Industrial:
Sophisticated copper ionization only systems are available for all industrial and agricultural applications, specifically but not limited to: heating and cooling systems, food and beverage, dispensing waste water treatment, agricultural drip irrigation, overhead spray systems and vapor mist, and chemical spray applications for herbicides and pesticides. Ionization lowers the surface tension of the water, yielding less chemical usage. Calcium is managed in bicarbonate form CA(H(CO³)² to 155°F under methods testing approved by ETL/EPA Labs and developed by Ecosmarte® in 1995. Alkalinity of the water is also primarily bicarbonate, reducing corrosion tendencies. These principles are consistent with Langlier theory, though not widely known in the water industry. Most Canadian and European water analysis are now measuring bicarbonates.
Copper Ionization:
Ecosmarte® uses conventional copper ionization (without silver) in two different ways in its technology (110 CU grade or better.): ECOsmarte® copper electrodes are manufactured in a water soluble, non-chemical or machine oil process.
Point-of-Entry:
In both residential and commercial applications between .1 ppm and .5ppm trace ionization is placed constantly in the water flow. Most water pipe size applications have been addressed. When used with Ecosmarte® electronic oxidation, calcium is kept in the soft bicarbonate form in standing pressure lines, and at fixtures. The heat point required to precipitate calcium in the carbonate form is increased substantially. Ecosmarte® has specific successful history to 26 grains of hardness, (442 ppm) with a TDS level as high as 3000. No pH histories above 8.4 have been tested. PH levels of 5.2 to 8.3 are therefore required. Ecosmarte® manufactures low and high TDS water models for Point-of-Entry equipment, recognizing that the conductivity of the water completes the circuit.
Spas and Swimming Pools:
Ecosmarte® uses ionization in trace residual amounts for spa and swimming pool applications. Cupric ions (Cu²+) is kept at .4 to .7 ppm residual requiring ionization for a maximum of 15 minutes per week on a 600 gallon spa and 4 hours per week on a 24,000 gallon swimming pool. No constant introduction of copper occurs and the residual sanitizer in the pool is recognized by the National Sanitation Foundation (NSF) and the U.S. Environmental Protection Agency. The Ecosmarte 30VA control box offers a choice of oxidation, ionization or on/off all swimming pool or spa equipment. Fully programmable models available. Installation of a pressure switch is recommended on spas.
Commercial and Industrial:
Sophisticated copper ionization only systems are available for all industrial and agricultural applications, specifically but not limited to: heating and cooling systems, food and beverage, dispensing waste water treatment, agricultural drip irrigation, overhead spray systems and vapor mist, and chemical spray applications for herbicides and pesticides. Ionization lowers the surface tension of the water, yielding less chemical usage. Calcium is managed in bicarbonate form CA(H(CO³)² to 155°F under methods testing approved by ETL/EPA Labs and developed by Ecosmarte® in 1995. Alkalinity of the water is also primarily bicarbonate, reducing corrosion tendencies. These principles are consistent with Langlier theory, though not widely known in the water industry. Most Canadian and European water analysis are now measuring bicarbonates.
Ecosmarte® provides the benefits, without the environmental health costs associated with chemicals.
Ecosmarte® Anodyne Oxygen Process and Ozone are the only known disinfectants that have the Oxidation potential to be effective against the water borne pathogen, cryptosporidium depending on quantity. The main advantage of the Ecosmarte® process and ozone is, they do not create health threatening by-products such as Dioxins, Trihalomenthanes (THMs) and haloactic acids that are created by Chlorination.
Ecosmarte® Anodyne process produces a more powerful and effective non-chemical method of water treatment than ozone. It should be noted that cryptolevels from municipal sources are at such high levels that ECOsmarte® system should be configured as the pretreatment for a Reverse Osmosis system. Ecosmarte® generates more oxygen radicals in one minute (20gr to 80gr) than most ozonators can generate in one hour (1/3 gram to 50 grams). Ecosmarte® Anodyne process is a proprietary water purification technology that provides much greater oxidation potential than ozone. To give comparison of oxidizing potential, if chlorine is the benchmark, than ozone is exponentially more effective than chlorine and Ecosmarte® Anodyne process would be exponentially and logarithmically more powerful than chlorine.
The Anodyne Oxygen Process:
Water is 88% oxygen and 12% hydrogen. By the use of low voltage electricity applied to water, the simple process of electrolysis causes the electro-physical separation of water into oxygen O1 and hydrogen which then forms Hydroxyl radicals OH. Ecosmarte® Anodyne process creates a combination of the most powerful oxidizers available for water disinfection, at a grams per minute level not available with ozonation.
Advantages of the Anodyne Process When Chlorine is Present (Regulated Water):
The primary benefit to the Anodyne process is, oxidation benefits are obtained prior to Chlorination or bromination. Consequently, most of the oxidation and disinfection will be performed by the oxidizers created from the Anodyne process. Unfortunately, many public waters require halogen residuals under city, county or state laws (49 states require halogen residuals).
The real benefit in these chemical residual waters, the oxidizers with the anodyne process do not promote the information of halogenated by-products, organic or inorganic contaminants (including halo mines.) In addition, the detrimental effects of halo genations can be diminished or eliminated entirely by the Anodyne process. Chemical expenses (exclusive of finishing, sand blasting, draining due to solid rise or cyanic toxicity) fall 50 to 80%.
Additional benefits are: Reduced odors, reduced skin and eye irritation and eliminating the use of anti-chlorine shampoos. The pretreated water is blue not green and possesses remarkable clarity. Only the waters are treated and disinfected, not the swimmer. When properly used, the anodyne process reduces or eliminates the bathtub ring or swimming pool water line and produces other aesthetic benefits. The bottom line is the anodyne process will lower chemical costs due to lowering the amount of chlorine or halogens which must be added to obtain the required residual. In turn, this will lower the amount of chemicals which must be added to maintain the pH and water balance. Ecosmarte® has several thousand applications experiences and estimates chemical reduction of 50-90%, depending on pool housekeeping, local climate, and application. Carbon dioxide is strongly recommended for commercial sites.

Ecosmarte® Anodyne Oxygen Process and Ozone are the only known disinfectants that have the Oxidation potential to be effective against the water borne pathogen, cryptosporidium depending on quantity. The main advantage of the Ecosmarte® process and ozone is, they do not create health threatening by-products such as Dioxins, Trihalomenthanes (THMs) and haloactic acids that are created by Chlorination.
Ecosmarte® Anodyne process produces a more powerful and effective non-chemical method of water treatment than ozone. It should be noted that cryptolevels from municipal sources are at such high levels that ECOsmarte® system should be configured as the pretreatment for a Reverse Osmosis system. Ecosmarte® generates more oxygen radicals in one minute (20gr to 80gr) than most ozonators can generate in one hour (1/3 gram to 50 grams). Ecosmarte® Anodyne process is a proprietary water purification technology that provides much greater oxidation potential than ozone. To give comparison of oxidizing potential, if chlorine is the benchmark, than ozone is exponentially more effective than chlorine and Ecosmarte® Anodyne process would be exponentially and logarithmically more powerful than chlorine.
The Anodyne Oxygen Process:
Water is 88% oxygen and 12% hydrogen. By the use of low voltage electricity applied to water, the simple process of electrolysis causes the electro-physical separation of water into oxygen O1 and hydrogen which then forms Hydroxyl radicals OH. Ecosmarte® Anodyne process creates a combination of the most powerful oxidizers available for water disinfection, at a grams per minute level not available with ozonation.
Advantages of the Anodyne Process When Chlorine is Present (Regulated Water):
The primary benefit to the Anodyne process is, oxidation benefits are obtained prior to Chlorination or bromination. Consequently, most of the oxidation and disinfection will be performed by the oxidizers created from the Anodyne process. Unfortunately, many public waters require halogen residuals under city, county or state laws (49 states require halogen residuals).
The real benefit in these chemical residual waters, the oxidizers with the anodyne process do not promote the information of halogenated by-products, organic or inorganic contaminants (including halo mines.) In addition, the detrimental effects of halo genations can be diminished or eliminated entirely by the Anodyne process. Chemical expenses (exclusive of finishing, sand blasting, draining due to solid rise or cyanic toxicity) fall 50 to 80%.
Additional benefits are: Reduced odors, reduced skin and eye irritation and eliminating the use of anti-chlorine shampoos. The pretreated water is blue not green and possesses remarkable clarity. Only the waters are treated and disinfected, not the swimmer. When properly used, the anodyne process reduces or eliminates the bathtub ring or swimming pool water line and produces other aesthetic benefits. The bottom line is the anodyne process will lower chemical costs due to lowering the amount of chlorine or halogens which must be added to obtain the required residual. In turn, this will lower the amount of chemicals which must be added to maintain the pH and water balance. Ecosmarte® has several thousand applications experiences and estimates chemical reduction of 50-90%, depending on pool housekeeping, local climate, and application. Carbon dioxide is strongly recommended for commercial sites.

Back To Top